|
John, I made a personal best 6 @32off, 34mph first day with the new fin! The ski definitely felt smoother, especially my on side (LFF). My gates & 1/3/5 in general were very good, with a much better turning radius.
As an additional note, I ski with David M. - he just purchased
the 106 for the Monza from you. He also made his personal best 6 @
32 off. The quote of the day was "John Horton is a freak'n genius". Overall, a great day.
Kevin from NorCal
John,
I finally had a chance to try the fin. It
was great. I was more forgiving when I forced the ski and everything else
was the same.
Dave from Winter Garden
John,
My husband, Frank, ordered your fin for his GOODE 9600 and
immediately loved it. He ordered one for my D3 and I too love it. I had my
two best ski days since I bought the ski in August. I always liked the ski
but the addition of the carbon fin makes it that much nicer.
Marla from Winfield, IL
JOHN
THE DAY I SEND YOU THE E-MAIL I WENT SKIING WITH MY PARTNER.
HE TRIED THE 88+ FIN ON THE MONZA , HE LOVED IT AND INCREASED HIS
PERFORMANCE FOR 6 BOUYS WITHOUT HESITATING. SO WE WOULD LIKE TO HAVE ANOTHER
88+ AND A 106+ FIN FOR EACH ONE OF US, SO WE CAN HAVE A SPARE.
I WILL CALL HIM TO ASK HIS CREDIT CARD NUMBER AND SEND IT TO YOU AS SOON AS
POSSIBLE SO YOU CAN SEND THE FINS TO US.
THANKS
P.S. BY THE WAY I ALSO INCREASED MY SKIING!!!!
JORGE
Hi John,
I received the fin and skied on
it with the same settings I had before, it definitely made the ski more
forgiving and I can get away with more mistakes. What exactly is this material? I can't believe how
light it is, yet withstands the abuse.
Rob
hello John,
i tried the carbon "goode"
fin yesterday and had my best set in many weeks the very first time i put it
on my ski. you were right! the fin you sent me turned better then the stock
fin.
Mike from AZ
John,
The carbon
fin is just what I needed. I had run one 32 so far this year and now, just
my third set on the new fin I ran two 32's and one on the set before that
for a total of three on the CarbonFin. My 22's and 28's are great. I am
getting more angle off of the ball and carrying more speed through the
turns.
Todd
Hey John!
Carbon Fins are not just for elite level skiers. I
struggle through the course. The carbon fin allowed me to get my
off-side cut worked out and smooth. Sometimes the skier needs some
equipment help to get the skills on the water. I thought it was a
gimmick, but it is the real deal.
John,
I started using the blades on my new D3,
Custom 4, 66.5. Results are indeed pretty obvious: the ski holds the angle
better and there is more of it thanks to a better/smoother turn. It also
makes my two turns more balanced.
Kind regards,
Chris
from
Belgium
I tied my personal best on a Carbon Fin with 1 @ 39! That
sucker is fast and holds all the angle I can handle.
Scot from Florida
I love it!!
Dr. Jim Michaels
Men's 4 Record Holder / 1@ 9.75m (43
off)
I tell anyone that asks, that I think
my ski works better with your fin, and that they should get one to try. You
are on the right path, Head On.
Brian Hockenbery
So. California Slalom Guru
The fin is everything you said it
would be. Your description on the web page is very accurate. My off side
turn is smooth and finishes with great angle. I'm very pleased.
Don from MI
I love the 88+ fin.
Chad from MI
The fin worked great. I'm just getting
used to the CR7. Tonight
was my 3rd ride on it but the fin has
transformed the ski. As you have
described in your web page it allows
the ski to turn faster and finish the turn more
smoothly.
Dr. Hank from Or.
After further testing yesterday, the
jury has come back... you're guilty of telling the truth! Flex matters. I
concede. I'll help spread the word, and, take the money with my complete
thanks. The blade is everything you said and nothing less. Better tip
control, smoother turns, softer turns, etc. Feel free to use bits/pieces if
not all of this email for your testimonials- I hope it helps.
Thanks again.
Ron in CT.
John,
I tried the 88+HO yesterday and it was
amazing !
I smashed my P.B. by 4 buoys. It now
stands at 4 1/2 @ 10.75 (39 1/2 off) !
I found the ski a lot faster through
the wakes and smoother in the turns but when you needed a very hard turn it
was there for you !!
Stephen from England
Hi John,
Scott wanted me to email you with
Sam's results (at Nationals).
He finished 2nd in slalom in Boys 1
riding a D3 with a
carbon fin.
Tom from Indiana
UPDATE : 3@39 AT STATE ( TIED
RECORD ) 4@39 AT REGIONALS ( NEW RECORD ) BOTH 1ST PLACE TROPHIES >>>>
ALL ON THE CARBON FIN !!!!! IT TRULY IS A GREAT PRODUCT !!!
LATER !
Scott From Indiana
Well, I've used the fin two days, and
I'm convinced it is a major
improvement. The increase in angle is
dramatic, and turns are lively.
These past two days I have had my best
sets of the year; those goals I
set for this year may be doable after
all.
Tom from Nebraska
___________________________________________________________________________________
John,
I put the 88+ on my 67" goode 9100
today. I meant to try the 105, but popped the 88 in. I skied pretty well,
ran my 35off @ 34mph out of the box with no problem with tail wind. Then
went out in the evening and ran easy 3@38. I normally get 2 so I was happy
with 3. I will keep with this fin.
Paul from Indiana
It was great!
Helped a lot with the ski staying in
the water on my turns at 35 and 38 off.
Nice product
Frank From Kentucky
John:
Only got into 391/2 one time in a
tournament but close on a lot. I'm very close to running it in practice.
Hitting 38 every day, if not off the dock I run it the next time. Probably
the most consistent I've ever been!!! Now just doing it in a tournament.
Keith From Florida
Hi John,
This is Sandy C. who you sold a
blade to. I am up here in Bristol, Vermont and I ski on Lake Dunmore. I just
wanted to tell you how much I like it. It seems to make my ski turns
smoother. It is hard to remember now that I have been skiing on your blade
for a month what my old ski was like but I think I felt like I had to force
the ski around the turn a lot more. It seems to turn smoother now. Thanks so
much for creating a great product. Take care.
Sandy From Vermont
Stewart P. from Peachtree City here.
Sorry it's been so long to get back to you since I ordered my carbon fin for
the H.O. but I got it dialed in and boy is it awesome!
Stewart from Places Unknown
John,
Ernie
S… here, had a chance to use your fin on my 2002 D-3 and what a difference!
I finding a lot more angle across the wakes and a much smother turn
and larger sweet-spot. I never felt in total control with my D-3. Your
product adds a whole new dimension to ski tuning and it works at a bargain
price considering the price of a new ski $600-$900.
Thanks
again,
Ernie S. From Places Unknown |
